AquaGuard® Coil
AquaGuard® is a water-repellent zip. AquaGuard® uses an auto lock slider. The water repellence is achieved by applying a polyurethane (PU) laminate on the backside of the tape, along with the improved element design. Three types of tapes are available: shiny (transparent film), matte (coloured film), and matte (transparent film). AquaGuard® is available with a Coil element, with standard polyester tape.
APPLICATION
Share:
AVAILABILITY
| Close | Open | 2-Way | Chain | |
|---|---|---|---|---|
| 3CCT9A | OK | – | OK | – |
| 3CFT8 | OK | OK | – | OK |
| 3CFT9A | OK | – | – | – |
| 3CFT10 | OK | OK | – | OK |
| 5CNT8 | OK | OK | OK | OK |
| 5CNT9 | OK | OK | OK | OK |
| 5CNT9 Two Tone | OK | OK | OK | OK |
| 5CNT10 | OK | OK | OK | OK |
CHAIN & SLIDER
| DABLH | DSBYG | DA |
|---|---|---|
| Enamel | Rubber tab | Enamel |
SLIDERS
PRODUCT CODES & DESCRIPTIONS (SA ONLY)
| Code | Product |
|---|---|
| 0744514 | 5 CNT10 CHAIN P16N DYED N-ANTI ROLL200 |
| 0828458 | CNT10C-59 DS6BYG H6 P16N PL580 PTOPBTM REVERSE |
| 4342152 | CNT10MR-5* DA8BLHD H3/DAG8B H3 P16N N-ANTI P-TOP REVERSE |
| 4337457 | CNT10OR-56 DA8BLHE E16N KENSIN N ANTI OP – H3 PTOP REVERSE |
CATALOGUE
TECHNICAL INFO
- Care instructions apply.
- Polyurethane film is sensitive to discolouring, colour migration, creasing, delamination and wear through friction.
- Particular caution should be taken to avoid colour migration when using contrasting colours.
- Vislon® AquaGuard® is not recommended for heavy weight bags and luggage.
- Do not use on a curved application since slider may cut the tape.
- Avoid applications where PU zips will come into contact with “vinyl,” such as PVC or PU.
- Avoid prolonged exposure to heat and humidity and keep the zip away from direct sunlight. UV may cause yellowing of the PU film.
- Minimal degradation may occur, but this will not affect the performance of the film.
- Repeated bending of the zip may cause the film to become discoloured.
- Tumble Dry on a normal or low heat.
- Dry-cleaning is with a petroleum-based solvent is recommended. Do not use a Chlorine based solvent.
- Avoid ironing, as it may flatten the film and cause the film to melt.
NOTE
AquaGuard® is water repellent and not waterproof, this product is not suitable to be used under water.
