AquaGuard® Vislon
AquaGuard® is a water-repellent zip. AquaGuard® uses an auto lock slider. The water repellence is achieved by applying a polyurethane (PU) laminate on the backside of the tape, along with the improved element design. Three types of tapes are available: shiny (transparent film), matte (colored film), and matte (transparent film). AquaGuard® is available with a VISLON® with standard polyester tape.
APPLICATION
Share:
AVAILABILITY
| Close | Open | 2-Way | Chain | |
|---|---|---|---|---|
| 3VT8 | OK | OK | OK | – |
| 3VT9 | OK | OK | OK | – |
| 3VT10 | OK | OK | OK | – |
| 5VT8 | OK | OK | OK | – |
| 5VT9 | OK | OK | OK | – |
| 5VT10 | OK | OK | OK | – |
| 8VT8 | OK | OK | OK | – |
| 8VT9 | OK | OK | OK | – |
| 8VT10 | OK | OK | OK | – |
CHAIN & SLIDER
| DABLH | DSBYG | DA |
|---|---|---|
| Enamel | Rubber tab | Enamel |
SLIDERS
PRODUCT CODES & DESCRIPTIONS (SA ONLY)
| Code | Product |
|---|---|
| 4660263 | VT10OR-36 DA EF PS12C KENSIN N-ANTI NEWKOB OP-NW2 |
| 4395326 | VT10OR-36 DA EF PS12C KENSIN N-ANTI NEWKOB4 |
| 4302496 | VT10OR-56 DA8DHR EF P14C KENSIN N-ANTI NEWKOB4 |
| 4264424 | VT10OR-56 NA9 EW P14C KENSIN N-ANTI NEWKOB4 |
| 4727206 | VT10C-56 DA8DHR9 EF P14C KENSIN N-ANTI |
| 4791114 | VT10C-5* DA8LH EF/DA8LH EF P14C N-ANTI ND-B SLSB-B |
| 4335331 | VT10C-5* DA8LH EF/DA8LH EF P14C N-ANTI ND-B SLSH-H |
| 4196351 | VT10MR-5* DA8DHR EF/DAG8 EF P14C N-ANTI ND-B |
CATALOGUE
TECHNICAL INFO
- Care instructions apply.
- Polyurethane film is sensitive to discolouring, colour migration, creasing, delamination and wear through friction.
- Particular caution should be taken to avoid colour migration when using contrasting colours.
- Vislon® AquaGuard® is not recommended for heavy weight bags and luggage.
- Do not use on a curved application since slider may cut the tape.
- Avoid applications where PU zips will come into contact with “vinyl,” such as PVC or PU.
- Avoid prolonged exposure to heat and humidity and keep the zip away from direct sunlight. UV may cause yellowing of the PU film.
- Minimal degradation may occur, but this will not affect the performance of the film.
- Repeated bending of the zip may cause the film to become discoloured.
- Tumble Dry on a normal or low heat.
- Dry-cleaning is with a petroleum-based solvent is recommended. Do not use a Chlorine based solvent.
- Avoid ironing, as it may flatten the film and cause the film to melt.
NOTE
AquaGuard® is water repellent and not waterproof, this product is not suitable to be used under water.
